Transformers Academy calendar

Unlocked by Ergon: Insulating liquids test – lesson #4: Insight into transformer oil sampling, obtaining a reliable oil sample

This lesson focuses on transformer oil sampling and it emphasizes the importance of obtaining a representative sample without compromising safety. Key points included...

FIND OUT MORE

Unlocked by Huaming: Design of power transformers – e-lesson #2 – Components and calculations

This is the second e-lesson in the Power Transformer Design course, authored and hosted on basic level by Aleksandar Lojpur. More lessons on...

FIND OUT MORE

Resonance Behavior in Transformer Windings – A Numerical Approach

Join us on December 4th at 2 PM CET for a new webinar hosted by SGB Smit Group!   Under specific operating conditions,...

FIND OUT MORE

Data-driven decisions for transformer longevity

As aging power grids evolve to accommodate increasing renewable energy integration and shifting load profiles, transformer asset management faces new challenges. This webinar...

FIND OUT MORE

Unlocked by SGB Smit: Design of power transformers – e-lesson #4 – Fundamentals of thermal design

This lesson provides a basic understanding of the key principles in thermal design for power transformers. We will cover the main heat sources...

FIND OUT MORE

THE H-J FAMILY OF COMPANIES: Explanation of Dual Voltage Transformer Concept and Application.

Join us on November 5th at 4 PM CET for a new webinar hosted by The H-J Family of companies.   The following...

FIND OUT MORE

Unlocked by SGB Smit: Design of power transformers – e-lesson #3 – Fundamentals of dielectric design

E-lesson 3: Fundamentals of Dielectric Design covers the following: Introduction to the key properties of electrical insulation materials and their impact on transformer...

FIND OUT MORE

Unlocked by Ergon: Insulating liquids test – lesson #3: Oil test priorities: specification, frequencies, limits

This is the third lesson of the insulating test course and it is held on the intermediate level! Topics of the third lesson...

FIND OUT MORE

Unlocked by Huaming: Design of distribution transformers – e-lesson #8: Transformers at no-load and on load

This is the eighth lesson in the Design of distribution transformers course, conducted on the Intermediate level. Here you can save your seat....

FIND OUT MORE

Unlocked: DGA Course – e-lesson #11: A brief “history of the future” – an advanced approach to DGA diagnosis based on AI

This is the eleventh lesson in the DGA course, authored and conducted by Marius Grisaru. Her you can save your seat. This lesson...

FIND OUT MORE

Unlocked by Ergon: Insulating liquids testing – lesson #2 – Review of available conventional literature, guides, and standards for oil testing

Join us on October 20 at 10 am CET for a free e-lesson! This is the second lesson of the Insulating liquids test...

FIND OUT MORE

Monitoring key assets: bushings, windings & OLTC for power transformers

Power systems are changing fast: decentralized generation and higher loading push grids to their limits while skilled staff is limited. In this environment,...

FIND OUT MORE

UNLOCKED BY HUAMING: OLTC Course – e-lesson #6 – Testing reactor type on load tap changers

Dynamic test techniques applied to transformers with reactor type on load tap changers This lesson focuses on testing reactor-type tap changers, which exhibit...

FIND OUT MORE

THE H-J FAMILY OF COMPANIES: Fuses selection and coordination to protect padmount transformers up to 12MVA

Join us on October 8th at 4 PM CET for a new webinar hosted by The H-J Family of companies.   The following...

FIND OUT MORE

Unlocked by Ergon: Insulating liquids test – lesson #1 – Introduction to insulating oil test

Join us on September 24 at 2 pm CET for a free e-lesson! The course on insulating oil tests covered the importance of...

FIND OUT MORE

Unlocked by Huaming: OLTC Course – e-lesson #5 – Testing resistor type on load tap changers

In this lesson you will learn about: – Purpose of the test/reasons to perform diagnostics – Dynamic Resistance Measurement: history, testing, procedure –...

FIND OUT MORE

THE H-J FAMILY OF COMPANIES: Course on Protections Coordination In Distribution Transformers

Join us on September 3rd at 4 PM CET for a new webinar hosted by The H-J Family of companies.   WHAT CAN...

FIND OUT MORE

OptiFender: Precise PD Localization in Transformers Unlocked

Maximized Asset Lifetime Extension with Instant Partial Discharge Localization   Learn how OptiFender pinpoints partial discharge in transformers for faster fixes and longer...

FIND OUT MORE

Enhance substation performance and availability

Discover how modern asset performance management (APM) systems are optimizing the availability and reliability of electrical equipment. In this webinar, transmission and distribution...

FIND OUT MORE

Enhance substation performance and availability

Discover how modern asset performance management (APM) systems are optimizing the availability and reliability of electrical equipment. In this webinar, transmission and distribution...

FIND OUT MORE

IN-SERVICE OIL ANALYSIS – ESTER LIQUID ESSENTIALS

Designed for end users, asset managers and operational stakeholders responsible for ester-filled transformers, this technical session focuses on the correct approach to analysing...

FIND OUT MORE

Unlocked by Huaming: OLTC Course – e-lesson #4 – Testing on load tap changers

Test techniques applied to transformers with on load tap changers Join Raka Levi for an insightful live session on the essential testing and...

FIND OUT MORE

Transformer oil – e-lesson #18 – A detailed comparison of Ester fluids and mineral oils

Join us on July 16th at Transformers Academy! This lesson provides a detailed comparison of ester fluids and mineral oils used in transformers,...

FIND OUT MORE

Transformer oil – e-lesson #17 – Alternative fluids – Basic features influenced by chemical structures

Join us on June 18th at Transformers Academy! This lesson provides an overview of alternative transformer fluids, focusing on how their chemical structures...

FIND OUT MORE